Featured Products
Products See More
Geotextiles/Woven & Non woven
Geogrids/UX/BX/Fiberglass/PET
Geomembranes/Pond Liners
Geonets
Geocells/Geoweb
Geosynthetics Mats/Geomat
Geosynthetic Clay Liners(GCLs)
Safety Fence
Geofibers/Engineering Fiber
Geocomposites
Drainage Nets
Waterstop Belt
Waterstop Sealant
Earthwork Material
Geotechnical/Engineering
 
Fiberglass
Geosynthetics
 
 
 
阿里巴巴
诚信通企业网站
 
Featured Products  
Rigid Polymer Fiber

 

Input Date::[2007/6/9 8:11:28]    From:Geosyntech Co.,Ltd.

 


   Rigid Polymer Fiber.pdf

GeotecTM Rigid Polymer Fiber

  [Description]
       GeotecTM rigid polymer fibre is used to instead of steel fibre for reinforcement to cement concrete.Compared with steel fibre,
it has the advantage of easy dispersing and blending, no damage to the mixing equipments, etc.

       GeotecTM rigid polymer fibre is used polypropylene as its raw material, produced the rough surface treatment by special parallel thread extruding & twisting process. It has high break strength, better dispersion and strong combining ability, will be widely used to instead of steel fibre to reinforce the cement concreat and crack- resistant. 

 

  [Main Technical Specification]

 Density(g/cm3)

                        0.91

 Elastic Modulus (MPa)

       >3500

 Length(mm)

                       20,30,54

 Equivalent Dia(mm)

  Ø 0.3±0.05

 Shape

 bundle-like and twisted

 break tensile Ratio(%)

         8-15

 Break Strength (MPa)

                       350

 Resistance to acid,alkali  

          strong

 

1.   Ratio design of the fibre concrete:

       Generally the recommended amount to add to the concrete is more than 2.7kg per sqm volume ratio is 0.3%,reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.

 

2. length: 

      50mm for common crack-resistant requirement.

 

3. Matching Ratio:

       Usually, it is no need to Change the matching ratio of the concrete. 

     Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the polypropylene fiber-mesh with the volume ratio of 1:1(0.9kg fiber-mesh to per sqm of cement concrete).

 

4.Mixer Adoption:

      Double-axle horizontal compelling mixer is priority.

 

5.Mixing process:

      Crushed stones, fibers and sands are put into the mixer in succession.After stirring for two minutes, fiber will fully spread and then add cement and water. and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to make fiber completely mixed.

 

6.Shaping & Maintenance

 

     There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be  done same as the normal concrete.

7.Package:1kg or 0.5kg per bag in common

     As per customers' requirement

 

 [Economy]

 

    Compared with steel fiber, GeotecTM Polymer fibre has the advantages of corrosion and wear-resistant reducing 50% cost with same volume to steel fibre.

 
 Previous     Next
PRINT】 【TOP】【CLOSE】  

Copyright 2006-2011   Geosyntech Co.,Ltd. All rights reserved. Management
            Registration No.:ICP-SD-07005678    Tel:0086 538 8489018    Fax:0086 538 8488028