Featured Products
Products See More
Geotextiles/Woven & Non woven
Geogrids/UX/BX/Fiberglass/PET
Geomembranes/Pond Liners
Geonets
Geocells/Geoweb
Geosynthetics Mats/Geomat
Geosynthetic Clay Liners(GCLs)
Safety Fence
Geofibers/Engineering Fiber
Geocomposites
Drainage Nets
Waterstop Belt
Waterstop Sealant
Earthwork Material
Geotechnical/Engineering
 
Fiberglass
Geosynthetics
 
 
 
阿里巴巴
诚信通企业网站
 
Featured Products  
Test Method of Geosynthtics and Chemicals

 

Input Date::[2008/4/20 21:23:17]    From:Geosyntech Co.,Ltd.

 

1 GB/T 1033-1986 塑料密度和相对密度试验方法 Test method for density and relative density of plastics
2 GB/T 1035-1970 塑料耐热性 (马丁) 试验方法 Test method for thermostability of plastics (Martin)
3 GB/T 1036-1989 塑料线膨胀系数测定方法 Determination for coefficient of linear expansion of plastics
4 GB/T 1037-1988 塑料薄膜和片材透水蒸气性试验方法 杯式法 Test method for water vapor transmission of plastic film and sheet--Cup method
5 GB/T 1038-1970 塑料薄膜透气性试验方法 Test method for gas permeability of plastic film
6 GB/T 1039-1992 塑料力学性能试验方法总则 Plastics--General rules for the test method of mechanical properties
7 GB/T 1040-1992 塑料拉伸性能试验方法 Plastics--Determination of tensile properties
8 GB/T 1041-1992 塑料压缩性能试验方法 Plastics--Determination of compressive properties
9 GB/T 1043-1993 硬质塑料简支梁冲击试验方法 Plastics-Determination of charpy impact strength of rigid materials
10 GB 1404-1995 酚醛模塑料 Phenolic moulding materials
11 GB/T 1630-1989 环氧树脂命名 Epoxide resins—Designation
12 GB/T 1631-1979 离子交换树脂分类、命名及型号 Classification,designation and types of ion exchange resin
13 GB/T 1632-1993 聚合物稀溶液粘数和特性粘数测定 Determination of viscosity number and limiting viscosity number of polymers in dilute solution
14 GB/T 1633-1979 热塑性塑料软化点 (维卡) 试验方法 Test method for Vicat softening point of thermoplastics
15 GB/T 1634-1979 塑料弯曲负载热变形温度 (简称热变形温度) 试验方法 Test method of heat deflection temperature underbending load for plastics
16 GB/T 1636-1979 模塑料表观密度试验方法 Test method for apparent density of moulding plastic materials
17 GB/T 1681-1991 硫化橡胶回弹性的测定 Rubber—Determination of rebound resilience of vulcanizates
18 GB/T 1683-1981 硫化橡胶恒定形变压缩永久变形的测定方法 Determination of compression set under constant for vulcanized rubber
19 GB/T 1684-1985 硫化橡胶短时间静压缩试验方法 Vulcanized rubber--Testing short time static compression
20 GB/T 1685-1982 硫化橡胶在常温和高温下压缩应力松弛的测定 Rubber, vulcanized--Determination of stress relaxation in compression at normal and at elevated temperature
21 GB/T 1688-1986 硫化橡胶伸张疲劳的测定 Rubber, vulcanized--Determination of tension fatigue
22 GB/T 1693-1981 硫化橡胶工频介电常数和介质损耗角正切值的测定方法 Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectric loss angular tangent &#118alue
23 GB/T 1694-1981 硫化橡胶高频介电常数和介质损耗角正切值的测定方法 Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent &#118alue
24 GB/T 1695-1981 硫化橡胶工频击穿介电强度和耐电压的测定方法 Vulcanized rubber--Test method for industrial frequency puncture voltage and dielectric strength
25 GB/T 1696-1981 硬质橡胶横向折断强度的测定方法 Ebonite--Determination of cross-breaking strength
26 GB/T 1697-1982 硬质橡胶抗冲击强度试验方法 Ebonite--Method of test for impact strength
27 GB/T 1698-1982 硬质橡胶硬度的测定 Ebonite--Determination of hardness by means of a durometer
28 GB/T 1699-1982 硬质橡胶耐热试验方法 Ebonite--Method of test for resistance to heating
29 GB/T 1700-1982 硬质橡胶抗剪切强度试验方法 Ebonite--Method of test for shearing strength
30 GB/T 1701-1982 硬质橡胶抗张强度和扯断伸长率的测定 Ebonite--Determination of tensile strength and elongation at break
31 GB/T 1841-1980 聚烯烃树脂稀溶液粘度试验方法 Test method for the viscosity of the dilute solution of polyolefine resin
32 GB/T 1842-1980 聚乙烯环境应力开裂试验方法 Test method for the fracture of polyethylene under environmental stress
33 GB/T 1843-1996 塑料悬臂梁冲击试验方法 Plastics--Determination of izod impact strength
34 GB/T 1844.1-1995 塑料及树脂缩写代号 第一部分:基础聚合物及其特征性能 Symbols of plastics and resins--Part 1: Basic polymers and their special characteristics
35 GB/T 1844.2-1995 塑料及树脂缩写代号 第二部分:填充及增强材料 Symbols of plastics and resins--Part 2: Fillers and reinforcing materials
36 GB/T 1844.3-1995 塑料及树脂缩写代号 第三部分:增塑剂 Symbols of plastics and resins--Part 3: Plasticizers
37 GB/T 1845-1988 聚乙烯和乙烯共聚物材料命名 Designation of polyethylene and ethylene copolymer materials
38 GB/T 1846-1980 聚氯醚树脂稀溶液粘度试验方法 Test method for the viscosity of the dilute solution of polychloroether resin
39 GB/T 1847-1980 聚甲醛树脂稀溶液粘度试验方法 Test method for the viscosity of the dilute solution of polyformaldehyde resin
40 GB/T 1884-1992 石油和液体石油产品密度测定法(密度计法) Petroleum and liquid petroleum producte--Determination of density-Hydrometer method
41 GB/T 2035-1996 塑料术语及其定义 Terms and definitions for plastics
42 GB/T 2406-1993 塑料燃烧性能试验方法 氧指数法 Plastics--Determination of flammability by oxygen index
43 GB/T 2407-1980 塑料燃烧性能试验方法 炽热棒法 Plastics--Combustion performance test--Blazing rod method
44 GB/T 2408-1996 塑料燃烧性能试验方法 水平法和垂直法 Plastics--Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
45 GB/T 2409-1980 塑料黄色指数试验方法 Plastics--Yellow index test method
46 GB/T 2410-1980 透明塑料透光率和雾度试验方法 Transparent plastics--Transmissivity and haze test
47 GB/T 2411-1980 塑料邵氏硬度试验方法 Plastics--Shore hardness test
48 GB/T 2412-1980 聚丙烯等规指数测试方法 Polypropylene--Method of determination of normal indices
49 GB/T 2546-1988 聚丙烯和丙烯共聚物材料命名 Designation of polypropylene and propylene copolymer materials
50 GB/T 2547-1981 塑料树脂取样方法 Plastic resins--Sampling
51 GB/T 2790-1995 胶粘剂180°剥离强度试验方法 挠性材料对刚性材料 Adhesives, 180° peel strength test method for a flexible-bonded-to-rigid test specimen assembly
52 GB/T 2791-1995 胶粘剂T剥离强度试验方法 挠性材料对挠性材料 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
53 GB/T 2793-1995 胶粘剂不挥发物含量的测定 Test method for nonvolatile content of adhesives
54 GB/T 2794-1995 胶粘剂粘度的测定 Determination methods for viscosity of adhesives
55 GB/T 2895-1982 不饱和聚酯树脂酸值的测定 Determination for acid &#118alue of unsaturated polyester resins
56 GB/T 2896-1982 聚苯乙烯树脂中甲醇可溶物的测定 Determination for content of methanol soluble matter in polystyrene resins
57 GB/T 2913-1982 塑料白度试验方法 Test for whiteness of plastics
58 GB/T 2914-1982 聚氯乙烯树脂挥发物 (包括水) 测定方法 Determination of volatile matter (including water) of polyvinyl chloride resins
59 GB/T 2915-1982 聚氯乙烯树脂水萃取液电导率测定方法 Determination of conductivity of aqueous extract of polyvinyl chloride resins
60 GB/T 2917-1982 聚氯乙烯热稳定性测试方法 刚果红法和pH法 Test methods for the thermal stability of polyvinyl chloride--Congo red method and pH method
61 GB/T 2943-1994 胶粘剂术语 Terms of adhesive
62 GB/T 3400-1993 通用型聚氯乙烯树脂在室温下增塑剂吸收量的测定 Determination of plasticizer absorption for polyvinyl chloride resins of general use at room temperature
63 GB/T 3402-1994 氯乙烯均聚物和共聚物树脂命名 Designation of homopolymer and copolymer resins of vinyl chloride
64 GB/T 3681-1983 塑料自然气候曝露试验方法 Plastics--Test methods of exposure to natural weathering
65 GB/T 3682-1983 热塑性塑料熔体流动速率试验方法 Test method for melt flow rate of thermoplastics
66 GB/T 3830-1994 软聚氯乙烯压延薄膜和片材 Calendered film(sheet)from flexible PVC
67 GB/T 3960-1983 塑料滑动摩擦磨损试验方法 Test method for friction and wear of plastics by sliding
68 GB/T 4217-1984 热塑性塑料管材的公称外径和公称压力 (公制系列) Thermoplastic pipes--Nominal outside diameters and nominal pressures--Metric series
69 GB/T 4454-1996 硬质聚氯乙烯层压板材 Rigid polyvinyl chloride laminated plates
70 GB/T 4608-1984 部分结晶聚合物熔点试验方法 光学法 Test for melting point of semicrystalline polymers--Optical method
71 GB/T 4610-1984 塑料燃烧性能试验方法 点着温度的测定 Test for flammability of plastics--Ignition temperature test
72 GB/T 4611-1993 通用型聚氯乙烯树脂"鱼眼"测试方法 Determination method of "fish eyes" for polyvinyl chloride resins of general use
73 GB/T 4612-1984 环氧化合物环氧当量的测定 Epoxide compounds--Determination of epoxide equivalent
74 GB/T 4613-1984 环氧树脂和缩水甘油酯无机氯的测定 Epoxide resins and glycidyl esters--Determination of inorganic chlorine
75 GB/T 4614-1984 用气相色谱法测定聚苯乙烯中残留的苯乙烯单体 Determination of residual styrene monomer in polystyrene by gas chromatography
76 GB/T 4615-1984 聚氯乙烯树脂中残留氯乙烯单体含量测定方法 Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
77 GB/T 4616-1984 酚醛模塑料丙酮可溶物 (未模塑态材料的表观树脂含量) 的测定 Phenolic moulding materials--Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
78 GB/T 4617-1984 酚醛模塑制品丙酮可溶物的测定 Phenolic mouldings--Determination of acetone-soluble matter
79 GB/T 4618-1984 环氧树脂和有关材料易皂化氯的测定 Epoxide resins and related materials--Determination of easily saponifiable chlorine
80 GB/T 4726-1984 树脂浇铸体扭转试验方法 Standard method of torsion test for resin cast
81 GB/T 4850-1984 压敏胶粘带低速解卷强度测试方法 Test method for unwinding force of pressure sensitive adhesive tapes at low speed
82 GB/T 4852-1984 压敏胶粘带初粘性测试方法 (斜面滚球法) Test method for tack of pressure sensitive adhesive tapes (method of oblique plane by rolling boll)
83 GB/T 5470-1985 塑料冲击脆化温度试验方法 Test method for brittleness temperature of plastics by impact
84 GB/T 5471-1985 热固性模塑料压塑试样制备方法 Preparation method for compression moulding of specimens of thermosetting moulding materials
85 GB/T 5472-1985 热固性模塑料矩道流动固化性试验方法 Test method for rectangular flow cure properties of thermosetting moulding compounds
86 GB/T 5473-1985 酚醛模塑制品游离氨的检定 Phenol-formaldehyde mouldings--Detection of free ammonia
87 GB/T 5474-1985 酚醛模塑制品游离氨和铵化合物的测定 比色法 Phenol-formaldehyde mouldings--Determination of free ammonia and ammonium compounds--Colorimetric comparison method
88 GB/T 5475-1985 离子交换树脂取样方法 Methods for sampling ion exchange resins
89 GB/T 5476-1996 离子交换树脂预处理方法 Methods for pretreating ion exchange resins
90 GB/T 5478-1985 塑料滚动磨损试验方法 Test method for wear of plastics by rolling
91 GB/T 5479-1985 塑料对应术语 Equivalent terms for plastics
92 GB 5577-1985 合成橡胶牌号规定 Codification of types for synthetic rubbers
93 GB/T 5757-1986 离子交换树脂含水量测定方法 Determination for water retention capacity of ion exchange resins
94 GB/T 5758-1986 离子交换树脂粒度分布测定方法 Determination for particle size distribution of ion exchange resins
95 GB/T 5759-1986 氢氧型阴离子交换树脂含水量测定方法 Determination for water retention capacity of anion exchange resins in hydroxylic form
96 GB/T 5760-1986 阴离子交换树脂交换容量测定方法 Determination for exchange capacity of anion exchange resins
97 GB/T 5761-1993 悬浮法通用型聚氯乙烯树脂 Suspension polyvinyl chloride resins of general purpose
98 GB/T 5836-1986 建筑排水用硬聚氯乙烯管材和管件 Unplasticized polyvinyl chloride pipes and fittings for drainage in building
99 GB/T 5836.1-1992 建筑排水用硬聚氯乙烯管材 Unplastisized polyvinyl chloride pipes for drainage in buildings
100 GB/T 5836.2-1992 建筑排水用硬聚氯乙烯管件 Unplasticized polyvinyl chloride fittings for drainage in buildings
101 GB/T 6111-1985 长期恒定内压下热塑性塑料管材耐破坏时间的测定方法 Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure
102 GB/T 6112-1985 热塑性塑料管材和管件耐冲击性能的测定方法 (落锤法) Standard test method for impact resistance of thermoplastic pipe and fittings by means of a tup (falling weight)
103 GB/T 6328-1986 胶粘剂剪切冲击强度和拉伸强度试验方法 Testing methods for impact shear strength of and tensile strength of adhesives
104 GB/T 6329-1996 胶粘剂对接接头拉伸强度的测定 Adhesives--Determination of tensile strength of butt joints
105 GB/T 6342-1996 泡沫塑料与橡胶 线性尺寸的测定 Cellular plastics and rubbers--Determination of linear dimensions
106 GB/T 6343-1995 泡沫塑料和橡胶 表观(体积)密度的测定 Cellular plastics and rubbers--Determination of apparent (bulk) density
107 GB/T 6344-1996 软质泡沫聚合物材料 拉伸强度和断裂伸长率的测定 Polymeric materlals, cellular flexible--Determination of tensile strength and elongation at break
108 GB/T 6595-1986 聚丙烯树脂"鱼眼"测试方法 Test method for fish eye count of polypropylene resin
109 GB/T 6596-1986 膜渗透压法测定聚苯乙烯标准样品的数均分子量 Determination of number-average molecular weight of polystyrene standards by membrane osmometry
110 GB/T 6597-1986 蒸气压渗透法测定聚苯乙烯标准样品的数均分子量 Determination of number-average molecular weight of polystyrene standards by vapor pressure osmometry
111 GB/T 6598-1986 小角激光光散射法测定聚苯乙烯标准样品的重均分子量 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
112 GB/T 6599-1986 体积排斥色谱法测定聚苯乙烯标准样品的平均分子量及分子量分布 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
113 GB/T 6668-1994 聚氯乙烯针织布基发泡人造革 Coated knitted fabrics from expanded PVC
114 GB/T 6669-1986 软质泡沫聚合材料压缩永久变形的测定 Polymeric materials, cellular flexible--Determination of compression set
115 GB/T 6671.1-1986 硬聚氯乙烯 (PVC) 管材纵向回缩率的测定 Unplasticized polyvinyl chloride (PVC) pipes--Determination of longitudinal reversion
116 GB/T 6671.2-1986 聚乙烯 (PE) 管材纵向回缩率的测定 Polyethylene (PE)pipes--Determinatio of longitudinal reversion
117 GB/T 6671.3-1986 聚丙烯 (PP) 管材纵向回缩率的测定 Polypropylene (PP)pipes--Determination of longitudinal reversion
118 GB/T 6672-1986 塑料薄膜和薄片厚度的测定 机械测量法 Determination of thickness of plastic film and sheeting by mechanical scanning
119 GB/T 6673-1986 塑料 薄膜与片材长度和宽度的测定 Plastics--Film and sheeting--Determination of length and width
120 GB/T 6691-1986 树脂整理剂折射率的测定方法 Resin finishing agent--Testing method for refractive index
121 GB/T 6692-1986 树脂整理剂比重的测定方法 Resin finishing agent--Testing method for specific gravity
122 GB 6734-1986 成包合成生胶取样 Raw synthetic rubber in bales--Sampling
123 GB 6735-1986 合成橡胶试样制备 Synthetic rubbers--Specimen preparation
124 GB/T 7042-1986 橡胶压缩或剪切性能的测定 (扬子尼机械示波器) Rubber properties determination in compression or shear (Yerzley mechanical oscillograph)
125 GB/T 7043-1986 硫化橡胶中金属含量的测定 火焰原子吸收光谱法 第二部分: 铜含量的测定 Vulcanized rubber--Determination of metal content--Flame atomic absorption spectrometric method--Part 2: Determination of copper content
126 GB/T 7122-1996 高强度胶粘剂剥离强度的测定 浮辊法 Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method
127 GB/T 7123-1986 胶粘剂适用期的测定方法 Test method for pot life of adhesives
128 GB/T 7124-1986 胶粘剂拉伸剪切强度测定方法 (金属对金属) The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
129 GB/T 7125-1986 压敏胶粘带厚度测定方法 涡流法 Testing method for thickness of pressure sensitive adhesive tapes (Eddy current)
130 GB/T 7130-1986 酚醛模塑制品中游离酚的测定 碘量法 Determination of free phenols in phenol-formaldehyde mouldings--Iodometric method
131 GB/T 7134-1996 浇铸型工业有机玻璃板材、棒材和管材 Poly (methyl methacrylate) cast sheets, rods and tubes
132 GB/T 7139-1986 氯乙烯均聚物和共聚物中氯的测定 Determination of chlorine in rinyl chloride homopolymers and copolymers
133 GB/T 7141-1992 塑料热空气暴露试验方法 Plastics--Methods of exposure to thermal air
134 GB/T 7142-1986 塑料长期受热作用后的时间-温度极限的测定 Determination of time-temperature limits of plastics after exposure to prolonged action of heat
135 GB/T 7155.1-1987 热塑性塑料管材及管件密度的测定 第Ⅰ部分: 聚乙烯管材及管件基准密度的测定 Determination of density of thermoplastic pipes and fittings--Part Ⅰ: Determination of reference density of polyethylene pipes and fittings
136 GB/T 7155.2-1987 热塑性塑料管材及管件密度的测定 第Ⅱ部分: 聚丙烯管材及管件密度的测定 Determination of density of thermoplastic pipes and fittings--Part Ⅱ: Determination of density of polypropylene pipes and fittings
137 GB/T 7193.1-1987 不饱和聚酯树脂 粘度测定方法 Unsaturated polyester resin--Determination of viscosity
138 GB/T 7193.2-1987 不饱和聚酯树脂 羟值测定方法 Unsaturated polyester resin--Determination of hydroxyl &#118alue
139 GB/T 7193.3-1987 不饱和聚酯树脂 固体含量测定方法 Unsaturated polyester resin--Determination of solid content
140 GB/T 7193.4-1987 不饱和聚酯树脂 80℃下反应活性测定方法 Unsaturated polyester resin--Determination of reactivity at 80℃
141 GB/T 7193.5-1987 不饱和聚酯树脂 80℃热稳定性测定方法 Unsaturated polyester resin--Determination of heat stability at 80℃
142 GB/T 7193.6-1987 不饱和聚酯树脂 25℃凝胶时间测定方法 Unsaturated polyester resin--Determination of gel time at 25℃
143 GB/T 7193.7-1992 液态不饱和聚酯树脂颜色试验方法 Test method for colour of liquid unsaturated polyester resin
144 GB/T 7194-1987 不饱和聚酯树脂浇铸体耐碱性测定方法 Unsaturated polyester resin--Determination of stability of casting resin in basic solution
145 GB/T 7359-1987 合成橡胶、合成胶乳名词术语 Synthetic rubber and synthetic latices—Technical terminology
146 GB/T 7749-1987 胶粘剂劈裂强度试验方法 (金属对金属) Test method of cleavage strength of adhesive (metal to metal)
147 GB/T 7750-1987 胶粘剂拉伸剪切蠕变性能试验方法 (金属对金属) Test method of creep properties of adhesive in shear by tension loading (metal to metal)
148 GB/T 7751-1987 胶粘剂贮存期的测定方法 Test method for storage life of adhesives
149 GB/T 7752-1987 绝缘胶粘带工频击穿强度试验方法 Test method for electric strength of insulating adhesive tape at power frequency
150 GB/T 7753-1987 压敏胶粘带拉伸性能试验方法 Test method for tensile properties of pressure sensitive adhesive tapes
151 GB/T 7754-1987 压敏胶粘带剪切强度试验方法 (胶面对背面) Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)
152 GB/T 8144-1987 阳离子交换树脂交换容量测定方法 Determination for exchange capacity of cation exchange resins
153 GB/T 8237-1987 玻璃纤维增强塑料(玻璃钢)用液体不饱和聚酯树脂 Liquid unsaturated polyester resin for glass fiber reinforced plastics
154 GB/T 8238-1987 不饱和聚酯树脂液体和浇铸体折光率的测定 Unsaturated polyester resin--Determination of refractive index of liquid and casting
155 GB/T 8323-1987 塑料燃烧性能试验方法 烟密度法 Test method for flammability of plastics--Smoke density test
156 GB/T 8324-1987 模塑料体积系数试验方法 Test method for bulk factor of moulding materials
157 GB/T 8325-1987 聚合物和共聚物水分散体 pH 值测定方法 Determinationd for pH of aqueous dispersions of polymers and copolymers
158 GB/T 8330-1987 离子交换树脂湿真密度测定方法 Method for the determination of true density of ion exchange resins in wet state
159 GB/T 8331-1987 离子交换树脂湿视密度测定方法 Method for the determination of bulk density of ion exchange resins in wet state
160 GB/T 8332-1987 泡沫塑料燃烧性能试验方法 水平燃烧法 Test method for flammability of cellular plastics--Horizontal burning method
161 GB/T 8333-1987 硬泡沫塑料燃烧性能试验方法 垂直燃烧法 Test method for flammability of rigid cellular plastics--Virtical burning method
162 GB 8655-1988 丁苯橡胶 (SBR) 1500 Rubber, styrene-butadiene (SBR) 1500
163 GB/T 8657-1992 丁苯生胶 皂和有机酸含量的测定 Rubber, raw styrene-butdiene—soap and organic acid content--Determination
164 GB 8659-1988 丁二烯橡胶 BR9000 (顺丁橡胶) Rubber, buladiene--BR9000(Cis-1,4-polybutadiene rubber)
165 GB/T 8661-1988 用气相色谱法测定丙烯腈-丁二烯-苯乙烯 (ABS)树脂中残留丙烯腈单体含量 Determination of residual acrylonitrile monomer content in acrylonitrile-buta-diene-styrene resin by gas chromatography
166 GB/T 8801-1988 硬聚氯乙烯 (PVC-U) 管件坠落试验方法 Test method for unplasticized (PVC-U) fittings by falling
167 GB/T 8802-1988 硬聚氯乙烯(PVC-U)管材及管件维卡软化温度测定方法 Determination of vicat softening temperature for unplasticized polyvinyl chloride (PVC-U) pipes and fittings
168 GB/T 8803-1988 注塑硬聚氯乙烯 (PVC-U) 管件 热烘箱试验方法 Fittings of injection-moulded unplasticized polyvinyl chloride (PVC-U)--Hot oven test
169 GB/T 8804.1-1988 热塑性塑料管材拉伸性能试验方法 聚氯乙烯管材 Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipes
170 GB/T 8804.2-1988 热塑性塑料管材拉伸性能试验方法 聚乙烯管材 Test methods of tensile properties for thermoplastic pipes--Polyethylene (PE) pipes
171 GB/T 8805-1988 硬质塑料管材弯曲度测量方法 Determination of deflection for rigid plastic pipes
172 GB/T 8806-1988 塑料管材尺寸测量方法 Method for dimension measuring of plastic pipes
173 GB/T 9341-1988 塑料弯曲性能试验方法 Plastics--Determination of flexural properties of rigid plastics
174 GB/T 9342-1988 塑料洛氏硬度试验方法 Plastics--Determination of hardness by the ball indentation method--Rockwell hardness
175 GB/T 9343-1988 塑料燃烧性能试验方法 闪点和自燃点的测定 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
176 GB/T 9344-1988 塑料氙灯光源曝露试验方法 Plastics--Methods of exposure to laboratory light sources (xenon arc lamp)
177 GB/T 9345-1988 塑料灰分通用测定方法 Plastics--Determination of ash--General methods
178 GB/T 9347-1988 氯乙烯-乙酸乙烯酯共聚物中乙酸乙烯酯的测定方法 Plastics--Vinyl chloride-vinyl acetate copolymers--Determination of vinyl acetate
179 GB/T 9348-1988 聚氯乙烯树脂的杂质与外来物粒子数的测定方法 Determination of number of impurities and foreign particles of polyvinyl chloride resins
180 GB/T 9349-1988 氯乙烯均聚物、共聚物树脂及组合物热稳定性的测定 变色法 Determination of the thermal stability of homopolymer and copolymer resins of vinyl chloride and their compounds--Discoloration method
181 GB/T 9350-1988 氯乙烯均聚物和共聚物树脂水萃取液ph值的测定 Homopolymer and copolymer resins of vinyl chloride--Determination of pH of aqueous extract
182 GB/T 9352-1988 热塑性塑料压缩试样的制备 Plastics--Compression moulding test specimens of thermoplastic materials
183 GB/T 9353-1988 用气相色谱法测定丙烯腈-丁二烯-苯乙烯 (ABS)树脂中残留苯乙烯单体 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
184 GB/T 9638-1988 塑料燃烧烟尘的测定 称量法 Gravimetric determination of smoke particulates from combustion of plastic materials
185 GB/T 9642-1988 聚乙烯(PE)管材和管件 根据聚乙烯公称密度和熔体流动速率命名的方法 Polyethylene (PE) pipes and fittings--Designation of polyethylene based on nominal density and melt flow rate
186 GB/T 9643-1988 聚乙烯(PE)管材和管件 熔体流动速率试验方法 Polyethylene (PE) pipes and fittings--Determination ofmelt flow rate
187 GB 9644-1988 硬聚氯乙烯(PVC-U) 饮水管材和管件 铅、锡、镉、汞的萃取方法及允许值 Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drinking water supply--Extractability of lead, tin, cadmium and mercury occurring as impurities--Test method and pemitted levels
188 GB/T 9645-1988 硬聚氯乙烯(PVC-U)管材吸水性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of water absorption
189 GB/T 9646-1988 硬聚氯乙烯(PVC-U)管材耐丙酮性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of resistance to acetone
190 GB/T 9647-1988 塑料管材耐外负荷试验方法 Test method for external loading resistance for plastic pipe
191 GB/T 10002.1-1996 给水用硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipe for water supply
192 GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯(PVC-U)管材 Unplasticized poly vinyl chlorid (PVC-U) pipes for buried drainage and sewerage systems
193 GB/T 10006-1988 塑料薄膜和薄片摩擦系数测定方法 Plastics--Film and sheeting--Determination of the confficients of friction
194 GB/T 10007-1988 硬质泡沫塑料剪切强度试验方法 Cellular plastics--Determination of shear strength of rigid materials
195 GB/T 10009-1988 丙烯腈-丁二烯-苯乙烯(ABS)塑料挤出板材 Acrylenitrile-butadiene-styrene (ABS) plastics extrusion plates
196 GB 10010-1988 医用软聚氯乙烯管材 Plasticized polyvinyl chloride (PVC)tubing for medical uses
197 GB/T 10798-1989 热塑性塑料管材通用壁厚表 Table of universal wall thickness of thermoplastics pipe
198 GB/T 10799-1989 硬质泡沫塑料开孔与闭孔体积百分率试验方法 Cellular plastics—Determination of volume percentage of open and closed cells of rigid materials
199 GB/T 10802-1989 软质聚氨酯泡沫塑料 Cellular plastics—Flexible polyurethane foam
200 GB/T 10805-1989 食品包装用硬质聚氯乙烯薄膜 Rigid polyvinyl chloride film for packaging food
201 GB/T 10807-1989 软质泡沫聚合材料压陷硬度试验方法 Polymeric materials, cellular flexible—Determination of hardness (indentation technique)
202 GB/T 10808-1989 软质泡沫塑料撕裂性能试验方法 Cellular plastics—Tear resistance test for flexible materials
203 GB 11115-1989 低密度聚乙烯树脂 Low density polyethylene resin
204 GB 11116-1989 高密度聚乙烯树脂 High density polyethylene resin
205 GB/T 11175-1989 聚乙酸乙烯酯乳液试验方法 Testing methods for polyvinyl acetate emulsion
206 GB/T 11177-1989 无机胶粘剂套接压缩剪切强度试验方法 Testing method for compressive shear strength of dowel joint by inorganic adhesives
207 GB/T 11546-1989 塑料拉伸蠕变测定方法 Plastics--Determination of tensile creep
208 GB/T 11547-1989 塑料耐液体化学药品(包括水)性能测定方法 Plastics--Determination of the effects of liquid chemicals including water
209 GB/T 11548-1989 硬质塑料板材耐冲击性能试验方法 (落锤法) Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight)
210 GB/T 11991-1989 离子交换树脂转型膨胀率测定方法 Ion exchange resins—Determination for swelling upon complete conversion
211 GB/T 11992-1989 氯型强碱性阴离子交换树脂交换容量测定方法 Strong basic anion exchange resins in chloride form—Determination of exchange capacity
212 GB/T 11997-1989 塑料多用途试样的制备和使用 Plastics—Preparation and use of multipurpose test specimens
213 GB/T 11998-1989 塑料玻璃化温度测定方法 热机械分析法 Determination of glass transition temperature of plastics--Thermomechanical analysis
214 GB/T 11999-1989 塑料薄膜和薄片耐撕裂性试验方法 埃莱门多夫法 Plastics--Film and sheeting—Determination of tear resistance—Elmendorf method
215 GB/T 12000-1989 塑料在恒定湿热条件下曝露试验方法 Plastics—Test methods of exposure to damp heat,steady state
216 GB/T 12004.1-1989 聚氯乙烯糊树脂中杂质粒子数测定方法 Determination of impurities particles number in polyvinyl chloride paste resins
217 GB/T 12004.2-1996 聚氯乙烯糊树脂 糊的制备 PVC paste resins--Preparation of a paste
218 GB/T 12004.3-1989 聚氯乙烯增塑糊表观粘度测定方法 Determination for apparent viscosity of polyvinyl chloride paste
219 GB/T 12004.4-1989 聚氯乙烯增塑糊 Brookfield 粘度测定方法 Polyvinyl chloride plastisols—Determination for Brookfield viscosity
220 GB/T 12004.5-1992 聚氯乙烯增塑糊刮板细度的测定 Polyvinyl chloride plastsols--Determination of fineness of grind
221 GB/T 12005.1-1989 聚丙烯酰胺特性粘数测定方法 Determination for limiting viscosity number of polyacrylamide
222 GB/T 12005.2-1989 聚丙烯酰胺固含量测定方法 Determination for solid content of polyacrylamide
223 GB/T 12005.3-1989 聚丙烯酰胺中残留丙烯酰胺含量测定方法 溴化法 Determination for residual acrylamide of polyacrylamide—Bromating method
224 GB/T 12005.4-1989 聚丙烯酰胺中残留丙烯酰胺含量测定方法 液相色谱法 Determination for residual acrylamide of polyacrylamide—Liquid chromatography
225 GB/T 12005.5-1989 聚丙烯酰胺中残留丙烯酰胺含量测定方法 气相色谱法 Determination for residual acrylamide content of polyacrylamide—Gas chromatograghy
226 GB/T 12005.6-1989 部分水解聚丙烯酰胺水解度测定方法 Determination for hydrolysis degree of partly hydrolysis polyacrylamide
227 GB/T 12005.7-1989 粉状聚丙烯酰胺粒度测定方法 Determination for particle size of pow der polyacrylamide
228 GB/T 12005.8-1989 粉状聚丙烯酰胺溶解速度测定方法 Determination for dissolving velocity of pow der polyacrylamide
229 GB/T 12005.9-1992 聚丙烯酰胺命名 Designation of polyacrylamide
230 GB/T 12005.10-1992 聚丙烯酰胺分子量测定 粘度法 Determination for molecular weight of polyacrylamide by viscometry
231 GB/T 12006.1-1989 聚酰胺粘数测定方法 Polyamides—Determination of viscosity number
232 GB/T 12006.2-1989 聚酰胺含水量测定方法 Polyamides—Determination of water content
233 GB/T 12006.3-1989 聚酰胺灰分测定方法 Polyamides—Determination of ash
234 GB/T 12006.4-1989 聚酰胺均聚物 沸腾甲醇可提取物测定方法 Polyamide homopolymers—Determination of matter extractable by boiling methanol
235 GB/T 12007.1-1989 环氧树脂颜色测定方法 加德纳色度法 Epoxide resins—Determination of color—Gardner color scale
236 GB/T 12007.2-1989 环氧树脂钠离子测定方法 Epoxide resins—Determination of sodium ion
237 GB/T 12007.3-1989 环氧树脂总氯含量测定方法 Epoxide resins—Determination of total chlorine content
238 GB/T 12007.4-1989 环氧树脂粘度测定方法 Epoxide resins—Determination of viscosity
239 GB/T 12007.5-1989 环氧树脂密度测定方法 比重瓶法 Epoxide resins—Determination of density—Pyknometer method
240 GB/T 12007.6-1989 环氧树脂软化点测定方法 环球法 Epoxide resins—Determination of softening point—Ring and ball method
241 GB/T 12007.7-1989 环氧树脂凝胶时间测定方法 Determination of gelation time of epoxide resins
242 GB/T 12008.1-1989 聚醚多元醇命名 Polyether polyols—Designation
243 GB/T 12008.2-1989 聚醚多元醇规格 Polyether polyols—Specification
244 GB/T 12008.3-1989 聚醚多元醇中羟值测定方法 Polyether polyols—Determination of hydroxyl number
245 GB/T 12008.4-1989 聚醚多元醇中钠和钾测定方法 Polyether polyols—Determination of sodium and potassium
246 GB/T 12008.5-1989 聚醚多元醇中酸值测定方法 Polyether polyols—Determination of acid number
247 GB/T 12008.6-1989 聚醚多元醇中水分含量测定方法 Polyether polyols—Determination of water content
248 GB/T 12008.7-1992 聚醚多元醇中不饱和度的测定 Polyether Polyols--Determination of unsaturation
249 GB/T 12008.8-1992 聚醚多元醇的粘度测定 Polyether polyols--Determination of viscosity
250 GB/T 12009.1-1989 异氰酸酯中总氯含量测定方法 Isocyanates—Determination of total chlorine content
251 GB/T 12009.2-1989 异氰酸酯中水解氯含量测定方法 Isocyanates—Determination of hydrolyzable chlorine content
252 GB/T 12009.3-1989 多亚甲基多苯基异氰酸酯粘度测定方法 Polymethylene polyphenyl isocyanate—Determination of viscosity
253 GB/T 12009.4-1989 多亚甲基多苯基异氰酸酯中异氰酸根含量测定方法 Polymethylene polyphenyl isocyanato—Determination of isocyanate content
254 GB/T 12009.5-1992 异氰酸酯中酸度的测定 Isocyanates--Determination of acidity
255 GB/T 12010.1-1989 聚乙烯醇树脂命名 Polyvinyl alcohol resins—Designation
256 GB/T 12010.2-1989 聚乙烯醇树脂规格 Polyvinyl alcohol resins—Specification
257 GB/T 12010.3-1989 聚乙烯醇树脂粘度测定方法 Determination for viscocity of polyvinyl alcohol resins
258 GB/T 12010.4-1989 聚乙烯醇树脂挥发分测定方法 Determination for volatile matter of polyvinyl alcohol resins
259 GB/T 12010.5-1989 聚乙烯醇树脂残留乙酸根(或醇解度)测定方法 Determination for residual acetic radical contents (or alcoholysis) of polyvinyl alcohol resins
260 GB/T 12010.6-1989 聚乙烯醇树脂乙酸钠含量测定方法 Determination for sodium acetate contents of polyvinyl alcohol resins
261 GB/T 12010.7-1989 聚乙烯醇树脂灰分测定方法 Determination for ash content of polyvinyl alcohol resins
262 GB/T 12010.8-1989 聚乙烯醇树脂 pH 值测定方法 Determination for pH of polyvinyl alcohol resins
263 GB/T 12010.9-1989 聚乙烯醇树脂平均聚合度测定方法 Determination for average polymerization degree of polyvinyl alcohol resins
264 GB/T 12010.10-1989 聚乙烯醇树脂粒度测定方法 Determination for particle size of polyvinyl alcohol resins
265 GB/T 12010.11-1989 聚乙烯醇树脂氢氧化钠含量测定方法 Determination for sodium hydroxide contents of polyvinyl alcohol resins
266 GB/T 12010.12-1989 聚乙烯醇树脂透明度测定方法 Determination for transparency of polyvinyl alcohol resins
267 GB/T 12024-1989 改性聚丙烯层压板材 Modified polypropylene laminating plates
268 GB/T 12025-1989 高密度聚乙烯吹塑薄膜 High density polyethylene blow film
269 GB/T 12026-1989 热封型双轴拉伸聚丙烯薄膜 Biaxially oriented polypropylene film for heat-seal
270 GB/T 12027-1989 塑料薄膜尺寸变化率试验方法 Test method for dimensional stability of plastic films
271 GB/T 12598-1990 离子交换树脂强度测定方法 渗磨法 Ion exchange resins—Determination for strength—Osmotic-attrited method
272 GB 12670-1990 聚丙烯树脂 Polypropylene resin
273 GB 12671-1990 聚苯乙烯树脂 Polystyrene resin
274 GB 12672-1990 丙烯腈-丁二烯-苯乙烯(ABS)树脂 Acrylonitrile-butadiene-styrene (ABS) resin
275 GB/T 12811-1991 硬质泡沫塑料平均泡孔尺寸试验方法 Test method for average cell size of rigid cellular plastics
276 GB/T 12812-1991 硬质泡沫塑料滚动磨损试验方法 Test method for tumbling friability of rigid cellular plastics
277 GB 12824-1991 丁苯橡胶 SBR1502 Rubber, styrene butadiene SBR1502
278 GB/T 13018-1991 聚乙烯(PE)管材 外径和壁厚极限偏差 Polyethylene (PE) pipes—Tolerances on outside diameters and wall thicknesses
279 GB/T 13019-1991 聚丙烯(PP)管材 外径和壁厚极限偏差 Polypropylene (PP) pipes—Tolerances on outside diameters and wall thicknesses
280 GB/T 13020-1991 硬聚氯乙烯(PVC-U) 管材—外径和壁厚极限偏差 Unplasticized polyvinyl chloride (PVC-U) pipes—Tolerances on outside diameters and wall thicknesses
281 GB/T 13021-1991 聚乙烯管材和管件炭黑含量的测定 热失重法 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
282 GB/T 13022-1991 塑料 薄膜拉伸性能试验方法 Plastics—Determination of tensile properties of films
283 GB/T 13353-1992 胶粘剂耐化学试剂性能的测定方法 金属与金属 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
284 GB/T 13354-1992 液态胶粘剂密度的测定方法 重量杯法 Test method for density of adhesives in fluid form—Method of weight cup
285 GB/T 13453.1-1992 氯乙烯均聚物和共聚物树脂水中筛析方法 Test method of vinyl chloride homopolymer and copolymerresins—Sieve analysis in water
286 GB/T 13453.2-1992 聚氯乙烯树脂甲醇或乙醇萃取物含量的测定方法 Determination for the content of methanol or ethanol extract of polyvinyl chloride resins
287 GB/T 13453.3-1992 聚氯乙烯灰分和硫酸化灰分的测定 Determination of ash and sulphated ash of PVC
288 GB 13454-1992 氨基模塑料 Plastics—Aminoplastic moulding materials—Specification
289 GB/T 13455-1992 氨基模塑料挥发物测定方法 Plastics—Aminoplastic moulding materials—Determination of volatile matter
290 GB/T 13519-1992 聚乙烯热收缩薄膜 Heat shrinkable polyethylene film
291 GB/T 13520-1992 硬质聚氯乙烯挤出板材 Unplasticized polyvinyl chloride extruded plates
292 GB/T 13525-1992 塑料拉伸冲击性能试验方法 Test method for tensile-impact property of plastics
293 GB/T 13526-1992 硬聚氯乙烯(PVC-U) 管材 二氯甲烷浸渍试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes—Dichloromethane test
294 GB/T 13527.1-1992 软聚氯乙烯管 (流体输送用) Plasticized polyvinyl chloride tubing for transport of fluids
295 GB/T 13527.2-1992 软聚氯乙烯管 (电线绝缘用) Plasticized polyvinyl chloride tubing for elect rical insulation
296 GB/T 13553-1996 胶粘剂分类 Classification of adhesives
297 GB/T 13657-1992 双酚-A型环氧树脂 Bisphenol—A epoxy resins
298 GB/T 13658-1992 多亚甲基多苯基异氰酸脂 Polymethylene polyphenylene isocyanate
299 GB/T 13659-1992 001×7 强酸性苯乙烯系阳离子交换树脂 001×7 Strongly acidic styrene type cation exchange resins
300 GB/T 13660-1992 201×7 强碱性苯乙烯系阴离子交换树脂 201×7 Strongly basic styrene type anion exchange resins
301 GB/T 13663-1992 给水用高密度聚乙烯(HDPE) 管材 High density polyethylene pipes for water supply
302 GB/T 13664-1992 低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材 Thin wall unplasticized polyvinyl chloride (PVC-U) pipes for low-pressure conveyance in irrigation
303 GB/T 13826-1992 湿式(非金属类)摩擦材料 Wet type (non-metallic)friction materials
304 GB/T 13940-1992 聚丙烯酰胺 Polyacrylamide
305 GB/T 13941-1992 二苯基甲烷4,4'-二异氰酸酯 Diphenylmethane 4,4'-diisocyanate
306 GB/T 14152-1993 热塑性塑料管材耐外冲击性能试验方法 真实冲击率法 Thermoplastic pipes--Determination of resistance to external impact--True impact rate method
307 GB/T 14153-1993 硬质塑料落锤冲击试验方法 通则 General test method for impact resistance of rigid plastics by means of falling weight
308 GB/T 14216-1993 塑料 膜和片润湿张力试验方法 Plastics--Film and sheeting--Test method for wetting tension
309 GB/T 14234-1993 塑料件表面粗糙度 Surface roughness for plastic parts
310 GB/T 14483-1993 塑料负载变形试验方法 Test methods for deformation of plastics under load
311 GB/T 14484-1993 塑料承载强度试验方法 Test method for bearing strength of plastics
312 GB/T 14485-1993 工程塑料硬质塑料板材及塑料件耐冲击性能试验方法落球法 Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball)
313 GB/T 14486-1993 工程塑料模塑塑料件尺寸公差 Dimensional tolerances for plastic engineering moulded plastic pats
314 GB/T 14517-1993 绝缘胶粘带工频耐电压试验方法 Test method for dielectric strength of insulating adhesive tape at power frequency
315 GB/T 14518-1993 胶粘剂的pH值测定 Determination of the pH of adhesives
316 GB/T 14519-1993 塑料在玻璃板过滤后的日光下间接曝露试验方法 Plastics--Method of exposure to indirect weathering using glass-filtered daylight
317 GB/T 14520-1993 气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量 Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography
318 GB/T 14572-1993 热塑性塑料树脂产品检验规则及标志、包装、贮运规定 Rules for inspecting,marking,packing,storing and transporting of thermoplastic materials
319 GB/T 14590-1993 钮扣用液体不饱和聚酯树脂 Liquid unsaturated polyester resin for button
320 GB/T 14647-1993 氯丁橡胶CR121 Chloroprene rubber CR121
321 GB/T 14694-1993 塑料压缩弹性模量的测定 Plastics--Determination of compressive elastic modulus
322 GB/T 14833-1993 塑胶跑道 Synthetic--Rubber sports track
323 GB/T 14903-1994 无机胶粘剂套接扭转剪切强度试验方法 Testing method for torsional shear strength of doedl joint by inorganic adhesives
324 GB/T 15047-1994 塑料扭转刚性试验方法 Test method for stiffness proporties in torsion of plastics
325 GB/T 15048-1994 硬质泡沫塑料压缩蠕变试验方法 Cellular plastics, rigid--Determination of compressive creep
326 GB/T 15223-1994 液体树脂密度的测定方法 比重瓶法 Plastics--Liquid resins--Determination of density by the pyknometer method
327 GB/T 15257-1994 混合调节型氯丁橡胶 CR321、CR322 Mixed modulation chloroprene rubber CR321,CR322
328 GB/T 15267-1994 食品包装用聚氯乙烯硬片、膜 Rigid polyvinyl chloride sheet and film for foodstuff packing
329 GB/T 15330-1994 压敏胶粘带水渗透率试验方法 Test method for water penetration rate of pressure-sensitive tapes
330 GB/T 15331-1994 压敏胶粘带水蒸汽透过率试验方法 Test method for water vapor transmission of pressure-sensitive tapes
331 GB/T 15332-1994 热熔胶粘剂软化点的测定 环球法 Determination of the softening point of hot-melt adhesives Ball and ring method
332 GB/T 15333-1994 绝缘用胶粘带电腐蚀试验方法 Test method for electrolysis corrosion of electrical insulating adhesive tapes
333 GB/T 15585-1995 热塑性塑料注射成型收缩率的测定 Determination of shrinkage for injection moulding thermoplastics
334 GB 15592-1995 糊用聚氯乙烯树脂 Paste polyvinyl chloride resins
335 GB 15593-1995 输血(液)器具用软聚氯乙烯塑料 Plasticized polyvinyl chloride (PVC) compounds for transfusion (infusion) equipment
336 GB/T 15594-1995 八羟基聚醚多元醇 Octahydroxy polyether polyols
337 GB/T 15595-1995 聚氯乙烯树脂热稳定性试验方法 白度法 Test methods for the thermal stability of polyvinyl chloride resin--Whiteness method
338 GB/T 15596-1995 塑料暴露于玻璃下日光或自然气候或人工光后颜色和性能变化的测定 Plastics--Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
339 GB/T 15597-1995 聚甲基丙烯酸甲酯(PMMA)模塑材料 Polymethyl methacrylate (PMMA) moulding materials
340 GB/T 15598-1995 塑料剪切强度试验方法 穿孔法 Testing methods for shear strength of plastics by punch tool
341 GB/T 15819-1995 灌溉支管用聚乙烯(PE)25管材 由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 Test method and specifications of susceptibility for environmental stress-cracking induced by insert type fittings in low density polyethylene (PE)25 pipes for irrigation laterals
342 GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings
343 GB/T 15903-1995 压敏胶粘带耐燃性试验方法 悬挂法 Test method for flame resistance of pressure--sensitive adhesive tapes
344 GB/T 16276-1996 塑料薄膜粘连性试验方法 Test method for blocking of plastic film
345 GB/T 16419-1996 塑料弯曲性能小试样试验方法 Plastics--Determination of flexural properties by use of small specimens
346 GB/T 16420-1996 塑料冲击性能小试样试验方法 Plastics--Determination of impact properties by use of small specimens
347 GB/T 16421-1996 塑料拉伸性能小试样试验方法 Plastics--Determination of tensile properties by use of small specimens
348 GB/T 16422.1-1996 塑料实验室光源曝露试验方法 第1部分:通则 Plastics--Methods of exposure to laboratory light sources--Part 1: General guidance
349 GB/T 16422.4-1996 塑料实验室光源曝露试验方法 第4部分:开放式碳弧灯 Plastics--Methods of exposure to laboratory light sources--Part 4: Open flame carbon arc lamp
350 GB/T 16576-1996 三羟基聚醚多元醇 Tri-hydroxy polyether polyols
351 GB/T 16577-1996 四羟基醚多元醇 Tetra-hydroxy polyether polyols
352 GB/T 16578-1996 塑料薄膜和薄片耐撕裂性能试验方法 裤形撕裂法 Plastics--Film and sheeting--Determination of tear resistance--Trouser tear method
353 GB/T 16579-1996 D001大孔强酸性苯乙烯系阳离子交换树脂 D001 macrporous strongly acidic styrene type cation exchange resins
354 GB/T 16580-1996 D201大孔强碱性苯乙烯系阴离子交换对脂 D201 macroporous strongly basic styrene type anion exchange resins
355 GB/T 16581-1996 绝缘液体燃烧性能试验方法 氧指数法 Test method for the determination of oxygen index of insulating liquids
356 GB/T 16582-1996 部分结晶聚合物熔点试验方法 毛细管法 Determination of melting point of semi-crystalline polymers--Capillary tube method
357 GB/T 16613-1996 试验用聚氯乙烯(PVC)糊的制备 分散器法 Preparation of polyvinyl chloride (PVC) pastes for test purposes--Dissolver method
358 GB/T 16800-1997 排水用芯层发泡硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems
359 GB/T 16867-1997 聚苯乙烯和丙烯腈-丁二烯-苯乙烯树脂中残留苯乙烯单体的测定 气相色谱法 Determination of residual styrene monomer in polystyrene and acry lonitrile-butadiene-styrene resins by gas chromatography
360 GB/T 2916-1997 塑料--氯乙烯均聚和共聚树脂--用空气喷射筛装置的筛分析 Plastics--Vinyl chloride homopolymer and copolymer resins Sieve analysis using air-jet sieve apparatus
361 GB/T 16422.3-1997 塑料实验室光源暴露试验方法 第3部分: 荧光紫外灯 Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
362 GB/T 16997-1997 胶粘剂 主要破坏类型的表示法 Adhesives--Designation of main failture patterns
363 GB/T 16998-1997 热熔胶粘剂热稳定性测定 Hot-melt adhesives--Determination of thermal stability
364 GB/T 5576-1997 橡胶与胶乳 命名法 Rubbers and latices--Nomenclature
365 GB/T 17037.1-1997 热塑性塑料材料注塑试样的制备 第1部分: 一般原理及多用途试样和长条试样的制备 Injection moulding of test specimens of thermoplastic materails--Part 1: General principles and moulding of multipurpose and bar test specimens
366 GB/T 17391-1998 聚乙烯管材与管件热稳定性试验方法 Test method for thermal stability of polyethylene pipes and fittings
367 GB/T 10004-1998 耐蒸煮复合膜、袋 Laminated retort film and pouch
368 GB/T 10005-1998 双向拉伸聚丙烯(BOPP)/低密度聚乙烯(LDPE)复合膜、袋 Biaxially oriented polypropylene laminated polyethylene(BOPP/LDPE) films and pouches
369 GB/T 8660-1998 溶液聚合型 丁二烯橡胶(BR)评价方法 Rubber,butadiene(BR)--Solution-polymerized types--Evaluation procedures
370 GB/T 8656-1998 乳液和溶液聚合型苯乙烯-丁二烯橡胶(SBR)评价方法 Styrene-butadiene rubber(SBR)--Emulsion and solution-polymerized types--Evaluation procedures
371 GB/T 8658-1998 乳液聚合型苯乙烯-丁二烯橡胶生胶结合苯乙烯含量的测定 折光指数法 Rubber,raw styrene-butadiene,emulsion-polymerized--Determination of bound styrene content--Refractive index method
372 GB/T 6594.1-1998 聚苯乙烯(PS)模塑和挤出材料 第1部分: 命名系统和分类基础 Polystyrene (PS) moulding and extrusion materials Part 1: Designation system and basis for specifications
373 GB/T 2918-1998 塑料试样状态调节和试验的标准环境 Plastics--Standard atmospheres for conditioning and testing
374 GB/T 2792-1998 压敏胶粘带180°剥离强度试验方法 Test method for peel strength of pressure-sensitive tape at 180°angle
375 GB/T 4851-1998 压敏胶粘带持粘性试验方法 Test method for holding power of pressure sensitive adhesive tapes
376 GB/T 17517-1998 胶粘剂压缩剪切强度试验方法 木材与木材 Adhesives-Wood to wood adhesive bonds-Determination of shear strength by compression loading
377 GB/T 1689-1998 硫化橡胶耐磨性能的测定(用阿克隆磨耗机) Rubber vulcanized-Determination of abrasion resistance(Akron machine)
378 GB/T 1034-1998 塑料吸水性试验方法 Plastics--Determination of water absorption
379 GB/T 17603-1998 光解性塑料户外暴露试验方法 Method for outdoor exposure testing of photodegradable plastics
380 GB/T 17643-1998 土工合成材料 聚乙烯土工膜 Polyethylene geomembrane
381 GB/T 17688-1999 土工合成材料 聚氯乙烯土工膜 Geosynthetics polyvinyl chloride geomembrane
382 GB/T 17689-1999 土工合成材料 塑料土工格栅 Geosynthetics plastic geogrid
383 GB/T 17690-1999 土工合成材料 塑料扁丝编织土工布 Geosynthetics plastic woven film yarn geotextile

 
 Previous     Next
PRINT】 【TOP】【CLOSE】  

Copyright 2006-2011   Geosyntech Co.,Ltd. All rights reserved. Management
            Registration No.:ICP-SD-07005678    Tel:0086 538 8489018    Fax:0086 538 8488028